iSpring RO Membrane Replacement Filter for Tankless Commercial Water Filtration

iSpring MCRO1000 RO Membrane Replacement Filter for Tankless Commercial Reverse Osmosis Water Filtration System CRO1000, 1000 GPD Unbeatable Performance The reverse osmosis membrane MCRO1000 is rated at 1000 gallon per day with up to 1.5:1 pure water to waste water ratio and the flow rate of up to 0.7 gallon per minute. It removes up to 99% of over 1,000 contaminants, including lead, chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more. Heavy Duty, yet Easy to Move Around Featured with 4.5” x 20” big blue pre-filter housings and stainless steel membrane housing, this 4-stage tankless system is set up on a sturdy freestanding metal frame with wheels and locking brakes for ease of movement. The system is also easily monitored with clear 1st stage filter housing and inlet and outlet pressure gauges. The Cores of iSpring CRO1000 Stage 1: The polypropylene sediment filter removes sediments, dust, sand, silt, dirt, and rust, preventing clogs and pressure loss. Stage 2 & 3: The carbon block filter removes up to 99% of chlorine as well as taste and odor, pesticides, herbicides, and more. Stage 4: The 1000 GPD RO membrane removes up to 99% of over 1,000 contaminants. iSpring RO Membrane for CRO1000 It is the 4th-stage filter of the iSpring commercial RO system CRO1000. 0.0001 micron RO membrane removes up to 99% of over 1,000 contaminants, including lead, chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more. The core of CRO1000 is rated at 1000 gallons per day. With up to 1.5:1 pure water to wastewater ratio, it is much more efficient than a traditional RO membrane. It is suitable for home, offices, labs, restaurants, coffee shops, teashops, breweries, and more. Please note: There are wet & dry membranes in the market and the ones we sell are the dry version. Compared to the wet version, the dry ones are easier to preserve (no need of vacuum sealing), and don’t contain a preservation solution that needs to be washed off before usage. Highlights： Micron Rating: 0.0001 μm Pure to drain water ratio: 1.5:1 Inlet Water Pressure Range: 80 – 130 psi Capacity: 1000 GPD (Gallons per Day) Replaced every 2-3 years, depending on the water quality FP25B FC25B MCRO1000 FP25BX4 FC25BX4 F2WGB22B Media Polypropylene Sediment Filter CTO Filter RO Membrane Filter Pack Filter Pack Filter Pack (FP25B & FC25B) Dimension 20” x 4.5” 20” x 4.5” 21” x 4” 20” x 4.5” 20” x 4.5” 20” x 4.5” Filter performance Removes sediments, dust, sand, large particles, silt, dirt, rust, and more Removes chlorine (up to 99%), taste, odor compounds, pesticides, herbicides, and more Removes up to 99% of over 1,000 contaminants, including lead, chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more. Removes sediments, dust, sand, large particles, silt, dirt, rust, and more Removes chlorine (up to 99%), taste, odor compounds, pesticides, herbicides, and more Removes sediments, dust, sand, large particles, silt, dirt, rust, and more. Removes chlorine (up to 99%), taste, odor compounds, pesticides, herbicides, and more Replacement Cycle 3-6 months 6-12 months 2-3 years 3-6 months 6-12 months FP25B: 3-6 months, FC25B: 6-12 months On Mar-17-22 at 07:58:04 PDT, seller added the following information: