Thermal Grizzly Conductonaut Extreme Thermal Grease – 1 Gram Thermal Paste

Product Description Thermal Grizzly Conductonaut extreme Ultra High Performance Liquid Metal Compound Conductonaut extreme by Thermal Grizzly is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness. Technical Details Density: 6,29g/cm³ Handling temperature*: 17°C – 150°C Operating temperature**: -50°C – 200°C Consistency***: liquid * In this temperature range you can apply Conductonaut Extreme to the surface. If this temperature was undershot during transportation or storage we recommend to heat up the product to at least 25 °C before application. Do NOT use a microwave to heat up the product. ** The operating temperature conforms the temperature after application and during operation. Very low temperatures may impact the performance and long term use. Detailed testing in each specific condition is absolutely recommended. *** in the temperature range of 25 °C to 500 °C Characteristics Optimised thermal conductivity compared to conventional liquid metal Increased material compatibility Optimum application due to metal needle Behind Liquid Metal Conductonaut Extreme thermal paste is technically not a thermal paste, as a paste consists of liquid and solid particles. The disadvantage of a paste is the solid particles. The surfaces of the base plate of the CPU cooler and the CPU heat spreader are uneven on a microscopic level. A traditional thermal paste fills these irregularities unevenly. Since the solid particles are larger than the gaps caused by the unevenness, more distance must be filled between the cooler and the heat spreader. A heat-conducting medium in the form of liquid metal does not have this problem because it does not contain any “large” particles. As a result, the surfaces of the CPU cooler and heat spreader are closer together. At the same time, liquid metal has a constant heat transfer, while the larger solid particles in pastes usually conduct heat better than the paste parts. Liquid metal is preferable to thermal paste, especially in high energy applications. Conductonaut Extreme is manufactured to the highest quality standards at our production site in Germany. Our expertly trained staff continuously monitor the entire production chain. From testing the purity of the raw material, to the production of the liquid metal and filling, to packaging, production is subject to multiple quality controls. It is recommended as a high-end product for experienced users who are looking for a solution with best heat dissipation in the temperature range above 8°C. We recommend applying Conductonaut Extreme on nickel-plated copper as this offers the best long-term stability. IMPORTANT WARNING! Conductonaut Extreme thermal paste must not be used with aluminium coolers! It is a metal alloy and may leave optical residues. For best long-term performance, we recommend heatsinks with nickel-plated copper bases. Storage Thermal Grizzly Conductonaut extreme should be stored boxed and under dry conditions at room temperature. Compatibilities PS3, PS4, PS5 Xbox 360, One, Series S, Series X CPU, GPU, LEDs Heat dissipation fins and fans Laptops, Macbooks Scope of delivery Conductonaut exteme Liquid Metal Compund A syringe of Thermal Grizzly Conductonaut extreme containing 1 gram of liquid metal compound Different needle attachments Two needle attachments ensure precise application of Conductonaut extreme liquid metal compound Applicators and Cleaning Pads Five applicators and two cleaning pads included for precise application and removal of the liquid metal compound Bag and Manual An airtight sealable and reusable package to prevent drying out. The package also contains instructions on how to apply the liquid metal correctly. To ensure authenticity, enter the code from the Certificate card on our website