60%

Scorpion HK-4035 Shaft Kit (6mm 30mm) : HK_4035_6MM_SHAFT

Share On:

Original price was: $33.40.Current price is: $20.04.

Category:
Meta:
EAN : 4897086980786
UPC : Does not apply
gtin13 : 4897086980786

Midland Helicopters Ltd Scorpion HK-4035 Shaft Kit (6mm 30mm) : HK_4035_6MM_SHAFT This product data sheet is originally written in English. Listings Feedback About Listings Feedback About Details of SKU: HK_4035_6MM_SHAFT Scorpion HK-4035 Shaft Kit (6mm 30mm) The Scorpion HK-4035 motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a “Less than Perfect” landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4035 series Scorpion Helicopter Motors. The shaft for the HK-4035 series motors measures 8mm in diameter, and is 94.7mm in long. The pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The shaft kit will also fit other brushless motors that require a 6mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors. Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing. Included in the Box – HK4035 Motor Shaft (6mm) x1 – Washer x 1 – C-Clip x 2 Important information for customers in the EU Please note: Contact Information You can contact us directly through eBay’s messaging system. The Scorpion HK-4035 motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a “Less than Perfect” landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4035 series Scorpion Helicopter Motors. The shaft for the HK-4035 series motors measures 8mm in diameter, and is 94.7mm in long. The pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The shaft kit will also fit other brushless motors that require a 6mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors. Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The sha EAN 4897086980786

Related products