RCA 12BH7 Stereo Amplifier Tube Hickok 539C Tested

Used, tests NOS RCA 12BH7A stereo amplifier tube, made in USA Test results: GM1=3000, GM2=3200 Hickok minimum = 1950/1950 Let us know if you have any questions whatsoever. If this tube is not what you are looking for, please look at the other tubes we have in our store you can search on the type number. When searching our store please do not use the tube type suffix. For example 6SN7 instead of 6SN7GT due to limitations on eBay’s search engine. How we test our tubes: Before we ship any vacuum tube, each tube is fully tested on our calibrated Hickok 539C tube tester. Every tube is tested for shorts using our Hickok 539C Ohm-meter. We don’t neon test for shorts, as it isn’t a sensitive enough test. We test the tubes for shorts hot and cold to 50MOhms. All tubes are gas leak tested to ensure the reliable performance of the tube. We test all tubes for mutual conductance (sometimes referred to as trans-conductance) including each section, if applicable. Hickok 539C provides a minimum acceptable mutual conductance. We will not sell tubes that meet these minimums. Most tube manufacturers provide new tube mutual conductance range(s), and we test to these range(s). We also life test every tube. This is a test where the filament voltage is reduced by 10%, which gives an indication of the future performance of the tube. We discard any tube that does not meet the life test. If any test results in failure for shorts, leaks or open filaments, we discard the tube, and will never ship it. Tube and box condition: Some of our tubes come with original boxes. If an NOS tube description does not indicate the tube is packed in its original box, it will be packed in a new, standard white box. Since we open all boxes to test them, sometimes the box flaps or tabs are damaged and we will note this in the description of the tube. All tubes will include the tube’s test results. Our simple warranty: We believe each tube should have an appropriate warranty, regardless if it is used, NOS or NIB, we do not sell as-is. If you are not delighted with your purchase, let us know and we will authorize the return of the tube. We may be able to provide another tube from our large inventory – your choice. To improve our quality, we would like to understand the reason for the return, but it is not a requirement. Returns must include the original box in the same condition (if applicable), and be packed in the original packaging. Purchaser must pay return shipping fees. When we receive the return, we will refund your purchase price (excluding original shipping fees) within 72 hours. We want you to be happy with your purchase, and will work with you if you have any concerns or problems. Please contact us to work out a mutually beneficial solution before writing negative feedback. About us: We have a collective 40+ years of experience in electronics and vacuum tubes. We have professional credentials and qualification in electronics and testing. Our staff has designed a significant number of vacuum tube-based equipment. It is not only our business, but also our hobby to design and refurbish vacuum tube equipment. Our supply of tubes: We buy all of our tubes from reliable sources and are always on the look out for quality tubes and tube suppliers. Special thanks to Frank Philipse (whose web site is tubedata.org) and other host sites of vacuum tube data. These are wonderful sites full of PDF specifications of vacuum tubes, we get our data from them. I f this item is shipped outside the US you are responsible for any customs charges; we will always declare the actual sales amount. Please DO NOT ASK us to falsify customs declarations. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.