Модуль платы разработки Nodemcu Lua ESP8266 последовательный WiFi интерфейс CH340 тип C

Feature Products Nodemcu Lua ESP8266 Serial WiFi Development Board Module CH340 Type-C Interface Product features: 1. Specifications are optional, with ESP-07/ESP-07S module, the base plate can be DIY. 2. Supports a variety of hibernation modes, standby power consumption as low as 1.0mw. 3. Built-in ultra-low power consumption 32-bit micro MCU, main frequency support 80 MHz and 160 MHz. 4. Complete 802.11b/g/n Wi-Fi SOC module. 5. Support secondary development, support for a variety of scenarios to use, ESP8266 is a high-performance wireless SoC, to provide maximum utility at the lowest cost, for Wi-Fi features embedded in other systems to provide unlimited possibilities. Parameter features: Color: Purple Chip Model: CH340 Size: 58mm*31mm 802.11 b/g/n Built-in Tensilica L106 ultra-low power consumption 32-bit micro MCU, main frequency support 80 MHz and 160 MHz, support RTOS Built-in 10 bit high precision ADC Built-in TCP/IP stack Built-in TR switch, balun, LNA, power amplifier and matching network Built-in PLL, regulator and power management components, +18 dBm output power in 802.11b mode A-MPDU, A-MSDU aggregation and 0.4 s guard interval Wi-Fi @ 2.4 GHz with WPA/WPA2 security mode support Support AT local upgrade and cloud OTA upgrade Supports STA/AP/STA+AP operating modes Supports Smart Config function (including Android and IOS devices) HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO Deep sleep hold current of 20 uA, shutdown current less than 5 uA Wake up, connect and pass packets within 2 ms Standby power consumption less than 1.0 mW (DTIM3) Module Main Parameters: ESP-07: Module Model: ESP-07 Module size: 21.2*16*3mm±0.1 mm SPI FLASH: 32 Mbit default Support interface: UART/GPIO/ADC/PwM Available I0 ports: 9 Serial port rate: 4608000bps, support 300~460800obps, default 115200bps Spectrum range: 2.4GHz, 2412~2484MHz Antenna Format: Ceramic/IPEX, on-board ceramic antenna and IPEX, both cannot be used at the same time Transmit power: 802.11b: 16±2dBm; 802.11g: 14±2dBm; 802.11n: 13±2dBm. Security: WEP/WPA-PSK/WPA2-PSK Power supply range: 3.3V, 3.0~3.6V, current>300mA Operating Temperature: -20°C~+85°C AT support: Built-in intelligent processing, can be read by AT command command Complete 802.11b/g/n Wi-Fi SOC module Built-in 1 channel 10 bit high precision ADC Support UART/GPIO/PWM interface Integrated Wi-Fi MAC/ BB/RF/PA/LNA Supports multiple sleep modes, standby power consumption as low as 1.0mw Serial port rate up to 4Mbps Supports Smart Config (APP)/AirKiss (WeChat) for Android and IOS. Built-in ultra-low power consumption 32-bit micro MCU, main frequency support 😯 MHz and 160 MHz, support RTOS Embedded Lwip protocol stack Supports STA/AP/STA+AP operating modes. Generic AT commands for quick start Support serial port local upgrade and remote firmware upgrade (FOTA) Support secondary development, integrated windows, Linux development environment ESP-07S: Module Model: ESP-07S Module size: 17*16*3mm±0.2 mm SPI FLASH: 32 Mbit default Supported interfaces: UART/GPIO/ADC/PwM Available I0 ports: 9 Serial port rate: 4608000bps, support 300~460800obps, default 115200bps Spectrum range: 2.4GHz, 2412~2484MHz Antenna Format: External Transmit power: 802.11b: 16±2dBm; 802.11g: 16±2dBm; 802.11n: 16±2dBm. Security: WEP/WPA-PSK/WPA2-PSK Power supply range: 3.3V, 3.0~3.6V, current>500mA Operating Temperature: -20°C~+85°C AT support: Built-in intelligent processing, can be read by AT command command Complete 802.11b/g/n Wi-Fi SOC module Built-in 1 channel 10 bit high precision ADC Support UART/GPIO/ADC/PWM/SPI/I2C interface Supports multiple sleep modes, deep sleep current as low as 20uA Integrated Wi-Fi MAC/BB/RF/PA/LNA Support multiple sleep modes, standby power consumption as low as 1.0mw Serial port rate up to 4Mbps Supports Smart Config (APP)/AirKiss (WeChat) for Android and IOS. Embedded Lwip protocol stack Support STA/AP/STA+AP working mode Common AT commands for quick start Support serial port local upgrade and remote firmware upgrade (FOTA) Support secondary development, integrated windows, Linux development environment Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, main frequency support 80 MHz and 160 MHz, support RTOS Product List: 1X Module 2X Pin Shipping Policy Item Location Payment Mathord Returns Policy About Feedback Shipping Policy 1. We Ship to Worldwide 2. We ship your orders within 1-2 business days after the payment cleared. 3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks. 4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don’t receive the item after 30 days,please keep in touch with us, we’ll investigate and solve the delivery problem. 5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. Item Location ShenZhen Payment Mathord 1. We accept PAYPAL only. 2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item is not paid in 7 days). 3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES. 4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION when you make payment Returns Policy 1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good condition when shipped to our customers. If product is defective or damage upon arrival, or wrong product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer. 2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner. 3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave negative feedback without first communication with us. Please allow max 24 HOURS for us to respond About Feedback We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.It is impossible to address issues if we do not know about them!