Microscale Micro Sol/Micro Set Solution/Liquid Decal Film Set MI-1/MI-2/MI-112

SAME DAY SHIPPING: W e strive to ship all items same day, Monday – Saturda y. Microscale Liquid Decal Film is ORM-D regulated product and can only be shipped via ground transportation equating to longer delivery times. Microscale Decal Solution Combo Set. Includes 1 oz bottle of Micro Set Solution,1 oz bottle of Micro Sol and 1 oz bottle of Liquid Decal Film. Product descriptions are provided below. MICROSCALE MICRO SET SOLUTION – 1OZ. BOTTLE (DECAL SETTING SOLUTION/REMOVER) MI-1 Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils in new paint and converts the adhesive on the back of the decal to a stronger and longer lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model’s surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called “painted on look.” To apply Micro Set: Use a soft flat artist’s brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin or Gloss. MICROSCALE MICRO SOL – 1 OZ. BOTTLE (DECAL SETTING SOLUTION) MI-2 Mirco Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal’s film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so a not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases, but if necessary, a second application of Micro Sol can be helpful. MICROSCALE LIQUID DECAL FILM – 1 OZ. BOTTLE MI-112 Create your own decals or save old ones. To make your own, brush film on a flat clean surface, allow to dry and draw or paint on your image. When brushed over an old decal, film seals and provides a new surfa ce.