60%

High Pressure Triplex Plunger Pump Insecticide Sprayer Agricultural Insecticide

Share On:

Original price was: $125.47.Current price is: $75.28.

Category:
Meta:
Packing size : 30*20*10
Package weight : 10KG
Sprayer Type : Pump
Type : nebulizer
Brand : Unbranded

26 Type High Pressure Triplex Plunger Pump Pesticide Sprayer Agricultural Pesticide Sprayer Cleaning Machine Disinfection Sprayer Product parameter product code：GJ00330 Name: Drug sprayer Package weight: 10KG Packing size: 30*20*10 Note before use: oil must be added before the machine is used, and the oil needs to be prepared by the user. (Using without adding oil will cause damage to the machine, such damage does not provide warranty) This machine does not contain power, you need to configure the motor or engine for use by yourself, please know! The machine has a test machine when it leaves the factory, and there will be some water and oil in it. Don’t mistake the machine for an old machine, hereby explain. Introduction to common problems of machine use: ①Whether the installation of the water inlet pipe requires a gasket to be placed in the joint. If the gasket is not placed, air will leak and the machine cannot absorb water. ② When fixing the machine, pay attention to the alignment of the power wheel and the belt pulley of this machine. Large deviations may cause the main shaft to shift. ③The filter should be connected to the top of the water pipe before the water is sucked. If the sundries are sucked in, the machine will not be able to absorb water and suppress pressure. ③When working, please put your hands on the side of the pressure regulating valve flat, tighten the pressure regulating valve, and adjust to the pressure required for spraying. (If the spray gun is not connected during work or the machine has no pressure when it is used for water delivery, the pointer of the pressure gauge will not move) The thickest interface on the front of the machine is the water inlet, the one with the valve on and off is the outlet for water pressure, and the one next to the pressure regulating valve is the backwater pressure relief port. The water inlet pipe and the return water pressure relief pipe of the machine are put into the bucket together, and the water pressure outlet is connected to the high pressure spray pipe to work. If the user installs a stirrer, please note that the stirrer should not be connected to the backwater pressure relief port of the machine. If it is connected, it will cause water leakage in the rubber ring of the pressure regulating valve.

color

26 Type, 21 Type

Related products