EasyColor DTV: The Ultimate Solution for Custom Vinyl Designs 11" x 16.5" Sheets

Siser EasyColor™ – Direct to Vinyl™ Full-Color is now available to everyone! What if you could achieve full-color designs by printing on HTV… using nothing but your home inkjet printer? Now you can with Siser EasyColor™ DTV™ (direct to vinyl)! EasyColor can be fed directly through a desktop inkjet printer just like you were printing on standard copy paper— no extra equipment required. When you’re finished with printing, cut your design out and mask using TTD Easy Mask, then you’re ready to apply! EasyColor is designed to work with virtually any desktop printer that uses inkjet inks. Note that you may experience mixed results when using toner (laser) printers. Designed to be compatible with desktop inkjet printers, EasyColor DTV provides excellent print quality with vibrant colors and a matte finish. Because EasyColor is only slightly thicker than Easyweed, it’s lightweight enough for polyester applications, yet opaque enough for true color quality on both dark and light fabrics. With amazing stretch and rebound, you’ll love the look and feel of EasyColor on almost any garment! From family photo keepsakes to color creations that last through multiple washings with your desktop inkjet printer! EasyColor DTV are CPSIA Certified so you can decorate kids’ items with confidence. **Due to the manufacturing process, material may vary in width by 1/8-1/4″. Specifications: Ink Compatibility: Inkjet • 100 Microns/3.94 Mils • 45°/60° blade • Layering not recommended CUTTER SETTINGS Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 15-20 Offset: .250 (45°) / .350 (60°) Speed: 10 Cricut Maker: Blade: Auto B lade, Fine-Point Setting: Heat Transfer (Non-Cricut) Brother Scan N Cut DX: Blade: AutoBlade Cut Speed: 5 Half Cut: Auto Silhouette Cameo 4: Blade: AutoBlade, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s Mimaki CG-60SR 3: Blade: 45° Cut Gram Force: 80 Offset: 30 Speed: 20-30 cm/s Titan 2 & 3 Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONS Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15-25 seconds • Peel carrier warm/hot • If areas of design lift after application, replace cover sheet and re-press for 10 seconds Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 3 seconds • Apply design at 305°F/150°C (EasyPress users add approx. 30°) • Use medium pressure for 15 seconds • Peel carrier warm/hot • If areas of design lift after application, replace cover sheet and re-press for 10 seconds RECOMMENDED ACCESSORIES & CARE EasyColor DTV Applies to: 100% cotton Poly/cotton blends 100% polyester Lycra Blends Recommended Accessories: Siser Weeder Multipurpose Paper Heat Transfer Cover Sheet Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Machine dry on low setting Do not dry clean Do not bleach