ESP8266 12V 4Channel WiFi Relay Smart Home Phone Remote Control SwitchUS

Product View Item Description “I. Overview The 12V ESP8266 four-way WIFI relay module uses the ESP-01 as a WIFI module, with a mature and stable 8-bit MCU chip. It can realize the wireless control of the 4-way relay using the mobile phone APP within the LAN in a simple configuration process. Second, functional characteristics 1, Onboard high performance microprocessor and ESP-01 WIFI module; 2, the module has 2 working modes: Mode 1: The mobile phone is directly mounted on the WIFI module; Mode 2: The mobile phone and WIFI module are loaded on the router at the same time; Additional features: It can also be used as a USB relay when the ESP-01 is unplugged. 3, transmission distance: (1) In the open environment, the maximum stable transmission distance when the mobile phone is mounted on the WIFI module is 100m; (2) When the WIFI module and the mobile phone are mounted on the router at the same time, the transmission distance is strong according to the signal of the router. Weak and certain. 4. Use Smartconfig technology to complete the configuration of the ESP-01 WIFI module account and password on the mobile phone APP. The configured account and password have the power-off memory function. 5, On-board 12V, 10A/250V AC 10A/30V DC relay, can continuously suck 100,000 times, with diode escaping protection, short response time; 6, onboard mode selection and real-time working status indicator; 7, with 4 optocoupler isolation, strong anti-interference ability; 8, reserved UART debug interface and MCU program download interface. Third, hardware introduction and explanation Board size: 60*63mm Board function description: 1, onboard resources: IN+, IN-: 12V power input; 5V, GND, TX, RX:UART serial port pin; SWIM, PIN8, NRST: Reserved MCU program download port. Button S1: Mode switch, default is mode 1 Press key S2: restore factory settings LED D1/D2/D3/D4 (red light): Relay operation indicator lighted when turned on LED D7 (red): Mode 1 indicator LED D5 (blue light): Mode 2 indicator LED D6 (green light): Operating status indicator, described as follows: (1) When it goes out, it means that it is self-configuring or losing connection with the router; (2) When 0.5S is flashing, it means waiting for the mobile phone APP to configure the WIFI account and password for the ESP-01 module; (3) When the 2S flashes slowly, it means that the configuration is completed, waiting for a TCP connection with the handset; (4) When it is always on, it means that it establishes a TCP connection with the handset. Reserved 2 jumper caps: Please plug in the bottom end when using normally (ie RX connects RX1, TX connects TX1). If you want to use USB to TTL serial port module to debug ESP-01 module, please plug it all the way to the top ( Otherwise there may be interference). COM1: public end; NC1: Normally closed, the relay is short-circuited with COM1 before the relay is closed, and it is vacant after being sucked up; NO1: Normally open, the relay is vacant before being sucked in, and shorted to COM1 after sucking. COM2: public end; NC2: Normally closed, the relay is shorted to COM2 before the relay is closed, and it is vacant after being sucked up; NO2: Normally open, the relay is suspended before closing, and shorted to COM2 after pull-in. COM3: public NC3: Normally closed, short-circuited with COM3 before the relay is closed, and it is vacant after suction; NO3: Normally open, the relay is vacant before being sucked up, and shorted to COM3 after sucking. COM4: public NC4: Normally closed, shorted to COM4 before the relay is closed, and it is left open after suction. NO4: Normally open, the relay is left unconnected before it is sucked in, and it is short-circuited with COM4 after pull-in. Relay control instructions (hex hexadecimal): Open the first relay: A0 01 01 A2 Turn off the first relay: A0 01 00 A1 Open the second relay: A0 02 01 A3 Close the second relay: A0 02 00 A2 Open the third relay: A0 03 01 A4 Turn off the third relay: A0 03 00 A3 Open the fourth relay: A0 04 01 A5 Turn off the fourth relay: A0 04 00 A4” Pls buy with confidence Shipping Payment About us customer service Pls buy with confidence We are spending more than 6 years in eBay business, we promise, we are an Honest and Hard-working seller, we do love our Job, we already try our best to provide best services. Hope you enjoy your purchase in our store If any questions and ideas, just feel free to tell us ,we are here for you or will be back to you within 24 hours. Our reputation for excellent customer service has been built over 5 years of trading by providing great value and support to all of our customers. With tens of thousands of products shipped,we understand the things that matter to you, the buyer. Shipping We ship to Paypal registered address only! Items will be shipped within 24 hours after payment received. For Items that shipped from China is send by Airmail, it normally take 15-35 days for delivery For Items that shipped from UK warehouse is send by Royal Mail , it normally take 2-5 days for delivery, and no tax to The European Union!!! If you do not receive your item after 35 days. please contact us immediately for further assistance. We will be responsible for any damages or losses incurred in the shipping process. Import duties, value added taxes and any other charges are NOT included in the item price or shipping costs. As an eligible importer,you are responsible for any reasonable tax or any other importation fees. Payment W e accept paypal only ! Payment must be received in 5 business days . Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. About us Specialized in electronic components and moudels. Real store, Goods in stock. Competive price. Good quality We have more than 8 years experience in international business.have a wealth of experience in shipment. and we work with reliableshipment company, can get good price from DHL in Hongkong. customer service 1. We take care of all requirements from every single valued customer, like you. Therefore, we do our best to control the quality of each item before sending. 2. In very rare case, if the product is found faulty, please contact us for return or refund. 3. In addition, we offer 30 days unconditional Refund Warranty and 1 Year Manufacturer Warranty. 4. We must be informed if you do not like the device within 7 days upon receiving the item and we will give you a returned merchandise authorization number (RMA). Without (RMA), the buyer will be responsible for any loss of return. 5. All returns must include all original items undamaged, in re-saleable condition, all original packaging including manuals, warranty forms, etc. 6. As we are selling all items on eBay from factory at lowest price, we are unable to refund you shipping and handling costs. Buyer is responsible for shipping costs incurred shipping products back. go to my store On Apr-27-18 at 03:24:15 PDT, seller added the following information: