Dash Cam OBD Hardwire Kit, Dash Camera USB Type C Hardwire Kit with OBD Power…

Dash Cam OBD Hardwire Kit, Dash Camera USB Type C Hardwire Kit with OBD Power Cable for Dashcam 12-24V to 5V/3A with Low Voltage Protection 24h Parking Surveillance/Acc Mode for Dashcam, GPS or Radar Product Details Brand: Redsia Orientation: Front and Inside Vehicle Service Type: Minivan, RV, Car, Truck, Tractor Connectivity Technology: OBD, USB Type C, OBD II Special Feature: low-voltage protection,short-circuit protection,intelligent line complement, Parking Monitor, USB Type C, Compact Design See more Video Capture Resolution: 1080p, 4K Included Components: Car Charger, Cable Clip, Hardwire Kit, Installation Tool Mounting Type: Dashboard Mount Control Method: Touch Product Dimensions: 4.72″D x 7.87″W x 1.2″H Included Components: Car Charger, Cable Clip, Hardwire Kit, Installation Tool Manufacturer: Winscon Electronics UPC: 780854249199 Brand Name: Redsia Auto Part Position: Rear Are Batteries Included: No Supported Standards: 1080p, 4K Compatible Devices: Cars, Trucks, Minivans, RVs, Tractors [excluding Electric Vehicles] Frame Rate: ≥ 30 FPS Control Method: Touch Screen Size: 3.5 Meters Auto Part Orientation: Front and Inside Compatible with Vehicle Type: Minivan, RV, Car, Truck, Tractor Connectivity Technology: OBD, USB Type C, OBD II Additional Features: low-voltage protection,short-circuit protection,intelligent line complement, Parking Monitor, USB Type C, Compact Design Video Capture Resolution: 1080p, 4K Mounting Type: Dashboard Mount Item Weight: 0.29 Pounds Item Dimensions D x W x H: 4.72″D x 7.87″W x 1.2″H [24h Parking / ACC Mode Switch]: ” MODE -“: will active your dashcam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; ” MODE O”: will active ACC mode which only supplier power when engine is on [Dash Cam OBD Hardwire Kit]: This OBD II dash cam hard wire power charging cable kit is a model for most car dash cameras, GPS, radar, and dash cams on the market (Please note that this unit DOES NOT work with EV Car/Electric Vehicle) [Simple Plug-in Installation]: The OBD dash cam hardwire cable is easy to install by plugging it into your car’s OBD connector and making sure it can power on your dashcam, then hide the extra wire; unlike other complex hardwire kits, you need to deal with fusebox and battery electricity [Low voltage protection]: It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it from draining the battery [Clean and Space Saving]: By using this dash cam OBD hardwire kit you can easily hide the wire and cable to make your carpet looks cableless and clean; also this dash cam charger doesn’t occupy your car’s cigarette lighter port and allow you can use the port to charge other devices in your car. [Question 1: Does Not Power Off]: The ACC Mode”0″, the OBD hardwire kit will power off in 20 minutes after the car engine is off(Time delay setup to provide power for car start/stop function) [Question 2: No Power]: The USB Type-C connector uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins [Question 3: Compatibility]: The OBD 2 connector is compatible with most gas and hybrid vehicles; it does not work with electric and plug-in hybrid vehicles. [Question 4: USB Type-C Connector]: Suitable to connect multiple devices (May not work with some phone charging protocol)