Creality 3D Printer Ender 3 S1 Series/Ender 5 S1/Ender 5 Plus Auto Leveling LOT

Title K2 Plus Series K1 Series DIY Printer 3D Scanner Laser Engraver Lcd Printer 3D Printer Filament 3D Printer Accessories Resin Other Creality 3D Printer Ender 3 S1 Series/Ender 5 S1/Ender 5 Plus Auto Leveling LOT Ender 3 Max Neo About this item 【CR Touch Automatic Leveling】Ender 3 Max Neo 3D printer is equipped with CR Touch sensor, which can improves the efficiency by automatically measuring and adjusting the 25-point print height on the heat bed, making leveling much easier. 【Larger Build Volume】The build volume of 300*300*320 mm allows the printing of both large models and small parts, or several small models on a large build surface at the same time, greatly increasing efficiency and offering more creative possibilities. 【High-precision Dual Z-Axis】Creality ender 3 max neo perfect coordination among dual Z-axes, timing belt and dual motors guarantees the stability and higher printing precision. Effectively avoid printing deviation in single-axis printing and reduces the possibility of lines and bulges on your side print. 【Full-metal Extruder & Get Rid of Noisiness】The full-metal bowden extruder is more durable and has greater extrusion force, it is guaranteed smooth infeed and outfeed, reducing the risk of nozzle blockage. Equipped with a 32-bit silent mainboard, the noise exposure is lower than 50dB, greatly reducing noise to let you enjoy your printing. 【Power Loss Recovery & Filament Sensor】The 350W high-quality built-in power supply is more secure and reliable, improving the stability and the sense of integration. The resume printing function can accurately record the data and restart the print from where it’s left off, no need to worry about sudden power failure. A filament sensor is equipped to detect the sufficiency of consumables, avoiding wasting and enhancing the success rate. Molding Technology: Fused deposition modeling Machine size: 516*582*590mm Build Volume: 300*300*320mm Package Dimension: 665*555*290mm Net Weight: 10.3kg Gross Weight: 13.5kg Printing Speed: ≤120 mm/s Printing Precison: ±0.1mm Layer Height: 0.05~0.35mm Filament Diameter: 1.75mm Nozzle Quantity: 1 Nozzle Diameter: 0.4 mm (standard) Nozzle Temperature: up to 260℃ Heat Bed Temperature: up to 100°C Build Surface: Carborundum Glass Extruder: Bowden Extruder Extruder Material: Full-metal Leveling Mode: CR Touch Auto-leveling Display: 4.3” Color Knob Screen Mainboard: 32-bit Silent Mainboard Resume Printing: Yes Filament Sensor：Yes Rated Voltage: 100-120V~, 200-240V~, 50/60Hz Rated Power: 350W Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D Data Transmission Method: Micro USB/TF Card 3D File Format: STL/OBJ/AMF Supported Filament: PLA/ABS/PETG/Wood Ender 3 S1 About this item 【Dual-gear Direct Extruder】Creality brand-new self-developed “Sprite” dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gearratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of filaments without slippingand works extremely well in printing flexible filaments such as TPU. 【CR Touch Automatic Bed Leveling】Ender 3 S1 3D Printer quick leveling powered by CR Touch. 16-point automatic bed leveling technology saves you the trouble of manual leveling. Simple and easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed. 【High-precision Dual Z-Axis】With a Z-axis dual-screw + Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. 【Easy to Install with 6-Step】96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer is simple and easy. Technical Specifications about Ender 3 S1 3D Printer Modeling Technology Fused deposition modeling Machine Size 487*453*622mm / 19.17*17.83*24.49 inch Print Size 220*220*270mm / 8.66*8.66*10.63 inch Product Weight 9.1KG / 20.06LB Print Precision ±0.1mm Layer Thickness 0.05-0.35mm Nozzle Diameter 0.4mm Printing Speed 150mm/s at the maximum Supported Filaments PLA/TPU/PETG/ABS Rated Voltage 115/230v 50/60Hz 4.5/2.5A Printing method Type-C USB/ SD card Supported file format STL/OBJ/AMF Slicer Software Creality Slicer/Simplify3D/Cura/Repetier-Host Ender 3 S1 Pro About this item [High-temp Passion, Good with Multiple Filaments]: For creality ender 3 s1 pro 3d printers, the most attracting thing is its good performance under high-temp conditions. The nozzle made of brass can stand up to 300 degrees celsius printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. [Hassle-free Leveling]: This creality 3d printer equipped with CR Touch, the automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. Therefore, Ender-3 S1 Pro is friendly, especially for 3D printing beginners. [Interaction via the 4.3-inch Color Touch Screen]: This ender 3d printer for beginners comes with the 4.3-inch color touch screen enables click-to-control. It supports the switch among nine languages, making the printer more manageable for people from various regions worldwide. Moreover, the touch screen will automatically dim out for energy-saving if there is no action for three minutes, echoing the energy conservation policy. [6 Steps Assembly, Easy to Handle]: This ender 3 s1 pro is of modularized structure. 96% of the print body is pre-installed. Thus, the assembly can complete within six steps, allowing users to begin their printing quickly with no complicated assembly steps. [Bend to Remove the Print]: The build surface of creality ender 3d printer is covered by a PEI spring steel build plate, which is durable. It not only has good adhesion to the printed models but is also bendable, enabling a slight flex to remove the print. In this way, no need to worry about model toppling or the difficulty to remove the print, Ender-3 S1 Pro helps solve these problems for users. [LED light strip, Human-centered Design]: This creality ender 3d printers with a LED light strip is equipped at the top of Z-axis, providing even fill-in light and allowing a precise observation in the dark. In addition, a handle is added to the build surface for easier pulling out under the high-temp condition. Safe enough for every user. The Ender 3 S1 Pro can be assembled rather quickly and it only takes 6 steps to assemble. Quite easy to handle! Build Volume 220*220*270 mm Machine Dimension 490*455*625 mm Build Surface spring steel PEI magnetic build plate Extruder “Direct Drive Extruder Leveling Mode Auto-leveling with CR-Touch Display 4.3” color touch screen Printing Speed maximum 150 mm/s Nozzle Temperature up to 300°C Heat Bed Temperature up to 110°C Resume Printing Yes Filament Sensor Yes Mainboard 32-bit silent mainboard Supported Filament PLA、ABS、WOOD、TPU、PETG、PA Ender 3 S1 Plus About this item: 【Larger Printing Size】Ender 3 S1 Plus 3d printer has a larger print size of 11.8*11.8*11.8inch compared to Ender 3, Ender 3 S1 and Ender 3 S1 Pro, which can print both large models and small parts, or print several small models at the same time on a large build surface, to achieve better printing results and larger print models. 【CR Touch Auto Bed Leveling】Creality Ender 3 S1 Plus 3d printers with CR-Touch 16-points automatic bed leveling, which can complete quickly adjust the the nozzle printing height on the hot bed, making the bed leveling more precise and saving the trouble of manual leveling. 【High-Precision Dual Z-Axis】Creality 3d printer has the dual Z-axis lead screws and dual motors design, this 3D printer works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. 【Ensure Smooth Feeding】This 3d printers for beginners comes with the new upgraded Direct Drive Extruder comes with the pushing force up to 80N, lightweight and powerful, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flaments like PLA, TPU, PETG, ABS, etc. 【4.3-Inch Touch Screen & Easy To Use】Ender 3 S1 Plus metal 3d printers is equipped with the 4.3-inch LCD, which enables click-to-control. It supports the switch among nine languages and will automatically dim out for energy-saving if there is no action for three minutes. 96% pre-installed, you can quickly install the printers with 6 steps. Power loss recovery supported and filament sensor installed. Ender 3 S1 Plus 3d printer has a larger print size of 11.8*11.8*11.8inch compared to Ender 3 S1 and Ender 3 S1 Pro, which can print both large models and small parts, achieve better printing results and larger print models. 300*300*300mm Large Build Volume Direct Drive Extruder CR Touch Auto-leveling High Precision Dual Z-axis 4.3-inch Touch Screen Click to Control 6 Steps Quick Assembly 32-bit Silent Board Support Power Loss Recovery Ender 5 S1 🤗𝐀𝐮𝐭𝐨 𝐁𝐞𝐝 𝐋𝐞𝐯𝐞𝐥𝐢𝐧𝐠 𝐒𝐞𝐧𝐬𝐨𝐫 𝐊𝐢𝐭 – Creality Ender 5 Plus 3D printer has auto bed leveling sensor which can precisely measure the tilt of hotbed surface and offers Z axis leveling compensation. Saving your time and reducing waste. 🤗𝐄𝐪𝐮𝐢𝐩𝐩𝐞𝐝 𝐰𝐢𝐭𝐡 𝐓𝐰𝐨 𝐋𝐞𝐚𝐝 𝐒𝐜𝐫𝐞𝐰𝐬 𝐨𝐧 𝐙 𝐀𝐱𝐢𝐬 – The hotbed of Creality Ender 5 Plus 3D printer was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches. 🤗𝐃𝐮𝐚𝐥 𝐘 𝐀𝐱𝐢𝐬 𝐌𝐨𝐭𝐨𝐫𝐬 – Creality Ender 5 Plus 3D printer supports dual-axis motors. Y-axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing. 🤗𝐄𝐚𝐬𝐲 𝐭𝐨 𝐀𝐬𝐬𝐞𝐦𝐛𝐥𝐞 𝐚𝐧𝐝 𝐎𝐩𝐞𝐫𝐚𝐭𝐞 – Creality Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble, and allows you to learn about the basic construction of a 3D printer. 🤗𝐄𝐱𝐭𝐫𝐚 𝐆𝐥𝐚𝐬𝐬 𝐏𝐥𝐚𝐭𝐞 – Creality Ender 5 Plus 3D printer adds a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provides all-around protection. Modeling Technology: Fused deposition modeling Printing Size: 350x350x400mm Machine size : 632x666x619mm Package size: 730*740*310mm G.W.: 23.8kg N.W. : 18.2KG Power parameters: DC 24V 21A，Max 25A，Max 550W Nozzle qty.: 1 Nozzle diameter：0.4mm Print Accuracy: ±0.1mm Maximum Hotend Temperature: ≤260°C Hot bed temp.: ≤100℃ Layer thickness: 0.1mm-0.4mm Nozzle temp.: ≤260℃ Printing materials: PLA/ABS/TPU/Wood/Gradient/Copper material Filament diameter: 1.75mm Files transfer: USB or TF card Slicing software: Creality Cura，Slicer，Simplify3D File format: STL,OBJ,AMF Ender 5 Plus 【Sticky and Bendable PC Build Surface】The PC spring steel sheet has two notches and a magnetic base for quick installation; The frosted PC surface is sticky to models; After printing, the model can be removed right away with a slight bend 【 Sticky and Bendable PC Build Surface】 : The PC spring steel sheet has two notches and a magnetic base for quick installation; The frosted PC surface is sticky to models; After printing, the model can be removed right away with a slight bend International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions Molding Technology: Fused deposition modeling Build Volume: 220*220*280mm Product Dimensions: 425*460*570mm Package Dimensions: 528*474*340mm Net Weight: 12.1kg Gross Weight: 14.7kg Extruder Type:Direct Drive Extruder Extruder Material: All metal Leveling Mode: CR Touch auto-leveling Nozzle Type: Brass nozzle x1 Nozzle Diameter: Standard 0.4mm Printing Accuracy: ±0.1mm Layer Height: 0.1-0.35mm Filament Diameter: 1.75mm Nozzle Temperature: ≤300°C Heatbed Temperature: ≤110°C Build Surface: PC spring steel sheet Power Loss Recovery: Yes Filament Runout Sensor: Yes Rated Voltage: 100-120V~, 200-240V~, 50/60Hz Rated Power: 350W File Transfer: Memory card, USB Type-C cable File Formats: STL, OBJ, AMF Supported Filaments: PLA, PETG, ABS, TPU, PC, ASA, HIPS Slicing Software: Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese Creality Ender-5 S1 3D Printer and Ender-5 Plus 3D Printer Model Ender-5 S1 Ender-5 Plus Printing Technology Fused deposition modeling Fused deposition modeling Build Volume 220*220*280mm 350x350x400mm Product Dimensions 425*460*570mm 632x666x619mm Net Weight 12.1kg 18.2KG Goss Weight 14.7kg 23.8kg Leveling Mode CR Touch auto-leveling CR Touch auto-leveling Printing Precison ±0.1 mm ±0.1 mm Motherboard 32-bit silent mainboard – Printing Speed ≤120mm/s ≤120mm/s Nozzle Diameter Standard 0.4mm Standard 0.4mm Supported Filament PLA, PETG, ABS, TPU, PC, ASA, HIPS PLA/ABS/TPU/Wood/Gradient/Copper material Display 4.3 inch color touchscreen 4.3-inch touch screen File Format STL, OBJ, AMF STL,OBJ,AMF Rated Voltage 100-120V~, 200-240V~, 50/60Hz 100-120V~, 200-240V~, 50/60Hz Rated Power 350W 350W Slice Software Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D Creality Cura，Slicer，Simplify3D Resume Printing Yes Yes Dual YZ-Axis ✔ ✔ Data Transmission Method Memory card, USB Type-C cable Type-C USB/SD Card Supported Language English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese extruder Direct Drive Extruder Bowden Exturder Payment Delivery Terms of sales About us Contact us Payment We accept payment via Payoneer. Please accomplish payment within 5 business days after you won the item. Delivery All your orders will be shipped within 1-2 business days and updated tracking info. Please make sure your address is full and correct, so that your order will be soon shipped and delivered smoothly. Most orders will adopt standard shipping, which usually needs 3-5 biz days. Any PO BOX addresses need to be confirmed if delivery or not. Terms of sales 1-month-returning for all orders after they are proved defective/damaged/faulty (videos or photos about it are preferred). Address on the package is not the return address, please email us firstly to get the correct return address. About us * Founded in 2014 by four 3D printing enthusiasts, Creality is a top global manufacturer of 3D printers. Our range of products includes DIY and resin 3D printers, 3D scanners, laser engravers, and filaments. Currently we host four brands of 3D printers: Creality as the master brand, and the three sub-brands of Ender, HALOT and Sermoon. Capitalizing on our innovatively leading technologies and products, we also offer consumer and professional printing solutions for makers, designers, schools and enterprises. Contact us Customer Service Hours: 9:00AM – 18:00PM BST (Beijing Standard Time) . You can also contact our official website customer support.