60%

Clock Audio CS 3SN-RF 3 Element Boundry Microphone Nickle New in Box

Share On:

Original price was: $26.39.Current price is: $15.83.

Category:
Meta:
Form Factor : Microphone
Connectivity : RF
Model : Clock Audio CS 3SN-RF
MPN : CS 3SN-RF
Brand : Clock Audio

Clock Audio Microphone CS 3SN-RF Nickle 3 Element New in Box The Consultant Boundary Series with inbuilt electronic touch sensitive switch. Developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation. The Consultant Boundary Series with inbuilt electronic touch sensitive switch. Developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation. Immune to RF artefacts. Half cardioid Polar Pattern. Inbuilt electronic capacitive touch switch with RGB Halo ring. Fully balanced. Engineered in high quality brass. Inbuilt Phantom Power Adaptor. Terminated with RJ 45 via TS-C1 for switching. Finish: Satin Nickel. Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module. Type Condenser (back electret). Polar Pattern Half Cardioid. Frequency Response 50 Hz – 18 KHz. Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). Impedance 200 Ohms. S/N Ratio 69dB (A). Maximum Sound Pressure Level 120dB 1% THD. Power Requirements 9 – 48 volts Phantom Power. Termination Open ended for audio. RJ 45 via TS-C1 for switching. Finish Black Nextel® or Satin Nickel. Dimensions 104mm (4.1″) x 44mm (1.7″) x 22mm (.87″). Weight 804g (28.4oz). Supplied Accessories TS-C1 Architects and engineer specifications The Condenser Microphone is a triple element Boundary Layer design with a Half Cardioid Polar Pattern. An inbuilt touch sensitive capacitive switch with RGB Halo allowing local switching Live / Muting of the Microphone. The Touch switch requires connection to TS-C1 then to an external DSP. The Microphone is made from solid brass and is permanently mounted with the use of an M 20 x 1 bolt and nut. The Microphone is fitted with a 6.6ft (2 Metres) cable with Open Ended termination. Also included is an integral Phantom Power Adaptor that accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all cellular frequencies (GSM/2G, 3G, 4G & 5G). Frequency response: 50Hz to 18 KHz; Sensitivity –37dB +/- 3 dB @ 1 KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB no greater than 1 %. Finish: Black Nextel® or Satin Nickel.

Related products