Carrier 15-ton condensing unit Air Handler 15 ton set ( Coolman / Luxaire )

Manufacturer: Carrier Corporation Model Number: 38AUDC16A05A0A0A0 Serial Number: 4921P42395 System Refrigerant: R-410A Cooling Capacity: 15 tons Voltage: 208/230V, 3-phase, 60 Hz Compressors: 2 – Compressor 1: RLA (Rated Load Amps) 25.0, LRA (Locked Rotor Amps) 164 – Compressor 2: RLA (Rated Load Amps) 25.0, LRA (Locked Rotor Amps) 164 Fan Motor: 3 – Motor 1: 208/230V, 1.5 FLA (Full Load Amps) – Motor 2: 208/230V, 1.5 FLA (Full Load Amps) – Motor 3: 208/230V, 1.5 FLA (Full Load Amps) Refrigerant Charge: 9 lbs, 4.1 kg Test Pressure: High 650 psig (4481.5 kPa), Low 450 psig (3102.6 kPa) Minimum Circuit Amps: 60.8 Maximum Fuse or HACR Type Breaker Amps: 80 The unit is suitable for outdoor installation and includes specific installation instructions. It is also certified by ETL and adheres to relevant industry standards. Luxaire NJ-15 Air Handling unit Manufacturer: Coleman Model#: NJ-15C00DSAAA2 · Make: Luxaire · Model code: NJ-15 · Weight: 796 lbs · Depth: 74.5 inches · Width: 33.0 inches · Height: 75.0 inches Inherently protected condenser fan motors Five-minute, anti-short cycle timer and minimum compressor run time Factory-installed disconnects, convenience outlet and technical coil option Durable build with condenser coils constructed with microchannel aluminum tubing and aluminum fins Self-contained, high and low pressure controls Class 2, 24-volt, thermostat control circuit Compressor staging for capacity reduction provides more economical operation and even temperature levels within the conditioned space Includes filter drier ready for field installation and is Smart Equipment enabled 2-pipe and 4-pipe configurations Standard operation to 40°F; factory or field-installed low-ambient VFD control to 0°F Scroll compressors provide both high efficiency and reliability Crankcase heaters that will be de-energized when the compressor is operating Solid state or internal line break compressor motor protection Copper stub-outs are factory-mounted on the suction and liquid lines to simplify field piping connections