Banana Pi BPI-PicoW-S3 with ESP32-S3 design support Arduino and microPython

Banana Pi BPI-PicoW-S3 Package Includes Package 1 1 x BPI-PicoW-S3 Package 2 1 x BPI- PicoW-S3 with Pre-soldered Headers Package 3 1 x BPI- PicoW-S3 with Pre-soldered Headers 1 x USB Cable Product Description The Banana Pi BPI-PicoW-S3 is a series of low-powered microcontrollers designed for IoT development and Maker DIY board.same size as Raspberry Pi Pico board,It supports 2.4 GHz Wi-Fi and Bluetooth® LE dual-mode wireless communication, the peripheral is compatible with low-power hardware design, and the power consumption is only 10uA in deep sleep mode.In terms of programming, the PicoW-S3 supports ESP-IDF, Arduino, micropython and other methods. Esp32-S3 is an MCU chip that integrates 2.4 GHz Wi-Fi and Bluetooth 5 (LE) and supports Long Range mode. The ESP32-S3 runs on an Xtensa® 32-bit LX7 dual-core processor with a high frequency of 240 MHz, 512 KB built-in SRAM (TCM), 45 programmable GPIO pins, and a rich communication interface. Esp32-s3 supports larger capacity of high-speed Octal SPI flash and off-chip RAM, and supports user-configured data caching and instruction caching. Product Features ESP32-S3, Xtensa® 32 bit LX7 External PSRAM, FLASH Ultra-low power 10uA 2.4G WIFI, Bluetooth 5, Bluetooth mesh GPIO, ADC, TOUCH, PWM, I2C, SPI, RMT, I2S, UART, LCD, CAMERA, USB, JTAG 1*microUSB 1*Full color LED BPI-PicoW-S3 Spec Sheet SoC ESP32-S3, Xtensa® 32-bit LX7 dual core Basic frequency 240MHz MAX Operating temperature -40℃~+85℃ On-chip ROM 384KB On-chip SRAM 320KB Onboard FLASH ROM 2MB On-chip peripheral PSRAM 8MB WIFI IEEE 802.11 b/g/n, 2.4Ghz band, 150Mbps Bluetooth Bluetooth 5, Bluetooth mesh GPIO BPI-PicoW-S3 has led out 27 available GPIOs ADC 2 × 12-bit SAR ADC supporting 18 analog channel inputs TOUCH Capacitive Touch Sensor 14 SPI 4 I2C 2. Support master or slave mode I2S 2, input and output of serial stereo data LCD 1, support 8-bit ~16-bit parallel RGB, I8080, MOTO6800 interface CAMERA 1, supports 8-bit ~16-bit DVP image sensor interface UART 3, supports asynchronous communication (RS232 and RS485) and IrDA PWM 8 independent channels, 14-bit precision MCPWM 2 USB 1 × Full Speed USB 2.0 OTG, MicroUSB Female USB Serial/JTAG Controller 1, USB full speed standard, CDC-ACM, JTAG Temperature sensor 1, the measurement range is –20 °C to 110 °C, for monitoring the internal temperature of the chip SD/MMC 1 × SDIO host interface, with 2 card slots, supports SD card 3.0 and 3.01, SDIO 3.0, CE-ATA 1.1, MMC 4.41, eMMC 4.5 and 4.51 TWAI® Controller 1, compatible with ISO11898-1 (CAN specification 2.0) Generic DMA Controller 5 receive channels and 5 transmit channels RMT 4-channel transmit, 4-channel receive, shared 384 x 32-bit RAM Pulse Counter 4 pulse count controllers (units), each unit has 2 independent channels Timer 4 × 54-bit general-purpose timers, 16-bit clock prescaler, 1 × 52-bit system timer, 3 × watchdog timers External crystal 40Mhz RTC and Low Power Management Power Management Unit (PMU) + Ultra Low Power Coprocessor (ULP) Low power consumption current 10uA Working Voltage 3.3V Input voltage 3.3V~5.5V Maximum discharge current [email protected] DC/DC Controllable full color LED 1 删除列 删除行 插入列 插入行 向右合并单元格 向下合并单元格 水平拆分单元格 垂直拆分单元格 背景色 删除表格 全选表格 隐藏边框 Development board BPI-PicoW-S3 Rraspberry Pi PicoW BPI-Leaf-S3 GPIO pinout 27 27 36 3.3v pin 1 1 2 5v pin 2 2 1 GND pin 8 8 4 Full color LED 1 on GPIO48 None 1 on GPIO48 Chip directly connected to USB MicroUSB port x1 MicroUSB port x1 Type-C USB port x1 UART TTL to USB None None None External battery socket None None 3.7v lithium battery power supply interface Battery charging None None 500mA charging I²C 4pin connector None None 1 删除列 删除行 插入列 插入行 向右合并单元格 向下合并单元格 水平拆分单元格 垂直拆分单元格 背景色 删除表格 全选表格 隐藏边框 Technical Support https://wiki.banana-pi.org/BPI-PicoW-S3