B362/362P Multifunctional Electric Balloon Pump Inflator Pump Air Blower

Multifunctional Electric Balloon Pump Inflator Pump Air Blower Timing Quantitative with 2 Inflation Nozzles 800W Product parameters Model: B362P Power:800W Voltage: – US: AC 110V ~ 120V – EU：AC 220V~240V Operating Temperature Range: 0 ~ 40℃. Color:Red Features: – One click start (green button). It is more convenient to operate after timing. – This is a powerful air pump, inflating the balloons in a fast speed. – With two inflation ports. – With the time controller and speed controller,can adjust the inflating time and the speed according to the balloon. – Touch-on switch design, just put the small tips on the nozzle, then press the nozzle slightly, and it will inflate the balloon. – Adjustable two tips for small balloon, when inflate the small size balloon, just put the tips on the inflation port. Operations: 1.Plug in the power supply. 2.3 Put a 10-inch latex ball around the air nozzle. 3.Put the switch in “I” gear. 4.Inflate the balloon with the pressure nozzle, release and stop the exhaust. 5. Twist the small air nozzle clockwise into the air nozzle. 6. Put a small latex ring ball on the air nozzle. 7. Press the air nozzle to inflate the balloon, release and stop the exhaust. 8.When gas is not used, turn the switch to gear 0. Use steps if time and speed control are required: 1.Put the switch in the “II” file and the time display screen will light up. 2.Press the first time button, and the number on the right side of the screen will jump (milliseconds). 3.Press the second time button to adjust the time you want (0.1-9.9). 4.After you adjust the time you want, press the first time button to confirm. 5.If you think the wind speed is faster, you can turn the speed control button to the right and the wind speed will be slower. 6.After setting the time you want, Press the second power start button( green button).That is to start according to the set time Inllatable. Warning: – Do not store or use inflator in wet conditions. – Never exceed recommended pressure, otherwise, serious injury might be caused by the bursting. – Never leave the pump unattended while it’s in use, please turn off when the inflator is not using. – Never allow sand, small rocks, etc, to be sucked into inflation port & nozzles when using the pump. – Do not working more than 2 hours for continuous operation. – Stop the use if the pump is damaged, especially the supply cord and the case, don’t immerse the pump in liquid. – A periodically maintenance of the pump is necessary. – Never look into or point at your eyes when the pump is in use. Product Photos weight:：4KG