60%

ASP Flying Model Rocket Kit Neo Standard ASP EKNST-18

Share On:

Original price was: $14.25.Current price is: $8.55.

Category:
Meta:
Brand : ASP
Features : Kit, Not Painted
MPN : EKNST-18
Type : Model Rocket
gtin13 : Does not apply
Vintage : No
Customized : No
Assembly Status : Unassembled Kit
UPC : Does not apply
Theme : Rockets & Space
Item Weight : 1 ounce
Unit of Sale : Single Unit
Item Length : 16.5 inches
Country/Region of Manufacture : United States
Material : Paper, Plastic, Wood, Metal
Age Level : 12 years and up

ASP Flying Model Rocket Kit Neo Standard ASP EKNST-18 A great beginner’s kit! Easy to build & fly. The fin design makes attachment and alignment extra-easy! Designed with the beginner in mind, but it’s also a fun sport flier for modelers of any experience level. Features laser-cut balsa fins, plastic nose cone, quick-change engine hook & parachute recovery. Designed to fly on easy to find 18mm standard engines. Good model to use to learn basic rocketry techniques – we think the “Neo” series of kits are perhaps our best all-around kits for the novice. Specifications: Length: 16.5″/41.9 cm Diameter: 0.98″/24.9 mm Weight: 1 oz/28 gm 12″ Parachute Recovery Recommended Engines: 1/2A6-2; A3-4; A8-3; B4-4; B6-4; C6-7; C12-6; D16-8 Skill Level: Beginner Center of Pressure: 14″ from tip of nose Estimated (calculated) altitudes: with 1/2A6-2: 115 feet/35 meters with A3-4: 320 feet/97.5 meters with A8-3: 330 feet/100.5 meters with B4-4 (Estes): 695 feet/212 meters with B4-4 (Quest Q-Jet): 720 feet/219.5 meters with B6-4: 730 feet/222.5 meters with C6-7: 1350 feet/411.5 meters with C12-6: 1265 feet/385.5 meters with D16-8: 1455 feet/443.5 meters What you’ll need to build this model: Required: Adhesive (A wood glue, such as Elmer’s Carpenters Glue or Titebond can be used for all steps and is recommended); sandpaper (medium – 220 or 280 grit); pencil or ball point pen; scissors; hobby knife; tape (cellophane, aka Scotch Tape, and/or masking). Optional: sandpaper (fine – 320 or 400 grit, extra fine – 500 or 600 grit); sanding sealer (or balsa fillercoat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Tamiya is recommended. Be sure not to mix different types or brands of paint without testing.) – primer; colors as desired & clear; sanding block; tack cloth. What you’ll need to fly this model: Electronic launch system; launch pad with 1/8″ launch rod; recovery wadding; engines (see list of recommended engines above).

Related products