50PACK 20OZ Sublimation Transfer Vacuum Insulated Tumbler With Lid Straw

Description US Stock-50pcs 20oz Taperless Sublimation Blank Skinny Tumbler Stainless Steel Insulated Water Bottle Double Wall Vacuum Travel Cup With Sealed Lid and Straw (White) Stock in California, US Fast shipping in 24h Door to Door delivery High Quality with positive feedback Accept local pickup and bulk order Descriptions: It’s ready for sublimation print by tumbler heat press machine or sublimation oven,the print color come out bright not foggy. Our sublimation skinny tumbler is completely straight not tapered, which is easy to make the full wrap sublimation print by mug tumbler press machine or sublimation oven. Specifications: Material: 304-18/8 food grade stainless steel Surface Finishing: Spray paint + sublimation coating Color: White Capacity: 20oz (590ml) Lid material: ABS Product Dimensions: Height (including lid): 21cm (8.3in) Lower Diameter: 7.1cm (2.8in) Hot / Cold: Hot & Cold Quantity: 10pcs / carton, 5ctns / set Weight: 3.8kgs (8.36lbs) / carton, 19.6kgs (43.21bs) / set Dimension: 41cm x 27cm x 17cm (16.1in x 10.6in x 6.7in) / carton, 49cm x 43cm x 48cm (19.3in x 16.9in x 18.9in) / set Note: 1. Please allow 1-3mm tolerance due to manual measurement. 2. In order to make the tumbler cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. Usages: 1) Note: Be sure to remove lid before sublimating! mug press Machine Settings: Press Temperature: 180℃ (356℉) Time: 60 Seconds Pressure: Medium Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape Place tumbler in press at the press temperature, and close the element around the tumbler Press for the specified time above needed using specified pressure If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 – 30 seconds Once done, remove the tumbler from the press and remove the transfer paper immediately Allow the tumbler to cool completely before use 2) Oven Settings Temperature: 165~170℃ (329℉~338℉) Time: 6 – 7 Minutes (Test in your oven for accurate time) Attach reversed printed image to tumbler with thermal tape Place tumbler in heat shrink bag or silicone wrap Set the convection oven at 165~170℃ (329℉~338℉) for 6 minutes. (Test to determine best timing!) Afterwards, remove heat shrink bag / silicone wrap and paper immediately Allow the tumbler to cool completely before use. Caution: Tumbler is extremely hot when in the mug press, do not handle with bare hands. Warm Tips: 1.It is normal for the machine to have gaps, so that there will be pressure. 2.The taperless tumbler can do the full print. We suggest change the position of tumbler and press again to avoid bad print. Applications: DIY: The surface of the cup can be designed according to your preferences, sublimation, laser engraving, embossed logo, silkscreen printing, heat transfer printing, etc. Design for all kinds of hot and cold beverages, our 20oz capacity wine tumbler is suitable for any indoor or outdoor places. Fit for enjoying drinks at home, on the beach, by the lake, at the pool, in the office, at the party, cabin trip, camping etc. On May 30, 2024 at 03:55:45 PDT, seller added the following information: On Sep 3, 2024 at 04:32:29 PDT, seller added the following information: