60%

1pcs Extractor Puller Universal Remover Gear Puller Tools Set Gear Puller

Share On:

Original price was: $10.93.Current price is: $6.56.

Category:
Meta:
gtin13 : Does not apply
UPC : Does not apply
MPN : does not apply
Colour : Silver
Brand : Unbranded

Feature: 【Alloy Pinion Puller】It can pull gears up to 11mm in outer diameter and 12mm in tooth height. Suitable for pulling pinions on small and medium-sized motors, such as remote control model motors, door lock actuator motors, 3D printers, extruders, stepper motors and so on 【Five Pins of Different Sizes】Used for pulling pinion gears of different sizes, according to the size of motor shaft diameter to select the pin to meet different needs 【Step for use 1】Select the required gear puller thimble, install the gear puller rotating rod and tighten the screws (Note: For the thimble with platform, the screws can not be too tight) 【Step for use 2】Install the gear puller rotating rod into the gear puller bracket and install the gear puller sliding plate. The gear puller sliding plate has different thicknesses at each end to make it easier to fit into the gap between the pinion and the top of the motor 【Step for use 3】Snap the motor into the gear puller travelling plate and move it until the motor shaft is aligned with the gear puller thimble. Turn the gear puller handle clockwise at a constant speed to pull out the motor gear Specification: Material: Stainless steel Application: Traction gear Standard set contains :0.9mm (cylindrical), 1.75mm (semi-circular), 1.75mm (cylindrical), 1.9mm (cylindrical), 2.8mm (semi-circular) Package List: 1Pcs Gear Puller Tool Set Note: 1.Transition: 1cm=10mm=0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website Caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data.

Related products