60%

1969 Oldsmobile “A” body taillight bezel. (362)

Share On:

Original price was: $88.00.Current price is: $52.80.

Meta:
Brand : Oldsmobile
Seller Notes : “Very Good - please see description”

1969 Oldsmobile “A” body taillight bezel. ( 362) 1969 Oldsmobile “A” body taillight bezel. ( 362) Here’s a really decent looking 1969 Olds Cutlass taillight bezel. The part number on back clearly reads 5961211. It is clearly asymmetrical in design. That means it will only fit on one side of the car. I’m NOT 100% sure which side it is. See photos of my personal 1969 Cutlass “S” convertible trunk area for assistance. Look at your own part to be sure. This is correct for all 1969 Olds “A” body cars from the lowly F-85 up to Cutlass thru Cutlass “S”, then Supreme, 442, and then the almighty Hurst Olds. Cue the ominous music. It does not fit wagons. Condition-wise, this has a lot going for it. The chrome part is essentially 100% pit free. YAY! However, it needs a good cleaning and polishing. Also, some ding-a-ling, probably me, tried unsuccessfully to repaint it at some time. He didn’t do a very good job. You will have to invest about 3 dollars of supplies and an hour of time to make this look nice again. You can just install it “as-is”, but it’s already off of the car. Just paint it, man. None of the all-important mounting prongs on back are missing or broken. All 3 of them look really strong and intact. There should be no problem mounting this thing. Enjoy. 362 4/9/2023 PLEASE TAKE A MOMENT TO VIEW MY EBAY STORE LISTINGS! Please keep in mind that all items came off 40 year old cars, mostly in junkyards. These have been cleaned and debugged, deleafed, deschmutzed and spiffied up, and in some cases look almost N.O.S., but they ARE NOT. All of our stuff is nice, some VERY, VERY NICE, but it is still JUNK and will have some defects somewhere. If you are looking for N.O.S., Martys-GM-Junk is not the place for you. Shipping Shipping will typically be FedEx. Kimberly Hallowell 16.00 Normal 0 false false false EN-US X-NONE X-NONE 1969 Oldsmobile “A” body taillight bezel. (362) Here’s a really decent looking 1969 Olds Cutlass taillight bezel. The part number on back clearly reads 5961211. It is clearly asymmetrical in design. That means it will only fit on one side of the car. I’m NOT 100% sure which side it is. See photos of my personal 1969 Cutlass “S” convertible trunk area for assistance. Look at your own part to be sure. This is correct for all 1969 Olds “A” body cars from the lowly F-85 up to Cutlass thru Cutlass “S”, then Supreme, 442, and then the almighty Hurst Olds. Cue the ominous music. It does not fit wagons. Condition-wise, this has a lot going for it. The chrome part is essentially 100% pit free. YAY! However, it needs a good cleaning and polishing. Also, some ding-a-ling, probably me, tried unsuccessfully to repaint it at some time. He didn’t do a very good job. You will have to invest about 3 dollars of supplies and an hour of time to make this look nice again. You can just install it “as-is”, but it’s already off of the car. Just paint it, man. None of the all-important mounting prongs on back are missing or broken. All 3 of them look really strong and intact. There should be no problem mounting this thing. Enjoy. 362 4/9/2023 1969 Oldsmobile “A” body taillight bezel. ( 362) 1969 Oldsmobile “A” body taillight bezel. ( 362) Here’s a really decent looking 1969 Olds Cutlass taillight bezel. The part number on back clearly reads 5961211. It is clearly asymmetrical in design. That means it will only fit on one side of the car. I’m NOT 100% sure which side it is. See photos of my personal 1969 Cutlass “S” convertible trunk area for assistance. Look at your own part to be sure. This is correct for all 1969 Olds “A” body cars from the lowly F-85 up to Cutlass thru Cutlass “S”, then Supreme, 442, and then the almighty Hurst Olds. Cue the ominous music. It does not fit wagons. Condition-wise, this has a lot going for it. The chrome part is essentially 100% pit free. YAY! However, it needs a good cleaning and polishing. Also, some ding-a-ling, probably me, tried unsuccessfully to repaint it at some time. He didn’t do a very good job. You will have to invest about 3 dollars of supplies and an hour of time to make this look nice again. You can just install it “as-is”, but it’s already off of the car. Just paint it, man. None of the all-important mounting prongs on back are missing or broken. All 3 of them look really strong and intact. There should be no problem mounting this thing. Enjoy. 362 4/9/2023 PLEASE TAKE A MOMENT TO VIEW MY EBAY STORE LISTINGS! Shipping Shipping will typically be FedEx. Please keep in mind that all items came off 40 year old cars, mostly in junkyards. These have been cleaned and debugged, deleafed, deschmutzed and spiffied up, and in some cases look almost N.O.S., but they ARE NOT. All of our stuff is nice, some VERY, VERY NICE, but it is still JUNK and will have some defects somewhere. If you are looking for N.O.S., Martys-GM-Junk is not the place for you. 1969 Oldsmobile “A” body taillight bezel. ( 362) Here’s a really decent looking 1969 Olds Cutlass taillight bezel. The part number on back clearly reads 5961211. It is clearly asymmetrical in design. That means it will only fit on one side of the car. I’m NOT 100% sure which side it is. See photos of my personal 1969 Cutlass “S” convertible trunk area for assistance. Look at your own part to be sure. This is correct for all 1969 Olds “A” body cars from the lowly F-85 up to Cutlass thru Cutlass “S”, then Supreme, 442, and then the almighty Hurst Olds. Cue the ominous music. It does not fit wagons. Condition-wise, this has a lot going for it. The chrome part is essentially 100% pit free. YAY! However, it needs a good cleaning and polishing. Also, some ding-a-ling, probably me, tried unsuccessfully to repaint it at some time. He didn’t do a very good job. You will have to invest about 3 dollars of supplies and an hour of time to make this look nice again. You can just install it “as-is”, but it’s already off of the car. Just paint it, man. None of the all-important mounting prongs on back are missing or broken. All 3 of them look really strong and intact. There should be no problem mounting this thing. Enjoy. 362 4/9/2023