186F 188F 190F Diesel Gas Welder Generator AVR 4.5KW 5.5KW 6KW 6.5KW 7KW 7.5KW

Product Description: Premium Automatic Voltage Regulator(AVR) for Many China-made Full Power Output (typically from 4.5KW to 6.5KW) Portable Diesel & Gasoline Welder Generators Powered by a 186F/186FA Diesel Engine or a 188F/190F Gas Engine, respectively. It can handle a maximum surge power of 7.5KW. Quality Product with Prompt Shipping & Solid After Sales Support! All our orders are shipped out of Atlanta, USA and EDT is about 1 to 3 business days for delivery in most areas of continental states. Packing Contents: 1 X AVR-DW4565. Seller’s Statement: Many other sellers just stole our part number, and directly copied our product description as well; however, their product is totally different from ours. Many products look very similar externally, but their internal design is very different. An incompatible AVR will damage and burn your generator head/alternator. Most of their AVRs have a small thermal sink or no external thermal sink at all, let alone say what’s inside. it will run very hot and burn in a very short period of service. You can easily see the difference externally by comparison of our product to the others’. Part Number: AVR-DW4565. Product Features: Built-in Full-Wave Output Bridge Rectification. Voltage Output Increase with Loading. Stable Voltage Output with Negative Voltage Feedback. Over Voltage, Over Current, Over Load and Short Circuit Protection. Large Manual Adjustable Voltage Output Range of 160 ~ 260VAC for 240VAC Output or of 0 ~ 80VDC for Welding DC Output. Technical Specifications: Model Name: AVR-DW4565 Excitation Voltage Input (Auxiliary Winding Voltage): 110 ~ 120V (AC) Rated Exciting Current Output: 2.5A Exciting Voltage Output: 30V (DC, Idle) & 90V (DC, Full Load) Sampling Voltage: 18VAC Welding Current Range: 50 ~ 200A Frequency: 50/60HZ Application Scope: Full-Power Output Diesel Welder Generator (4KW ~ 6.5KW) AC Voltage Output: 120V/240V Rated Welding DC Voltage Output: 25 ~ 30V Idle Welding DC Voltage: 70 ~ 75V Continuous Welding Load Ratio: 60% Auto Voltage Adjusting Accuracy: ≤ ±1%. Maximum Temperature Rise: 130C or 266F. Continuous Working Time: ≥ 20 Hours. Installation-Center Distance: 134 ± 0.5 mm Wiring Connections: An old version AVR may be used with different color wires & connectors on your welder generator. Please refer to the following wiring information to rewire our AVR to fit your welder generator. If you are not sure of how to rewire it, please contact us for technical support. 2 YELLOW wires in the 4-pin connector(Signal Sampling, No Direction) 2 BLUE wires in the 4-pin connector(Auxiliary Winding Power Input, No Direction) The individual (Separate) RED wire(Excitation Output, to the Positive Terminal of carbon Brush) The individual (Separate) GREEN wire(Excitation Output, to the Negative Terminal of carbon Brush) The WHITE and BLACK wires in the small 6-pin connector(Adjusting Welding Current, No Direction, to Rheostat/Potentiometer) The RED and BROWN wires in the small 6-pin connector( Welding Current Signal Sampling, RED to Positive Welding Terminal & Brown to Negative Welding Terminal) Shipping: We ship worldwide. Please contact us and confirm international shipping & handling fee for shipping out of USA before you place an order with us. Warranty: We warrant our PRODUCTS against manufacturer defects in materials, workmanship and finish under normal use and service for three (3) months from the original date of purchase. Please retain the dated invoice as evidence of the date of purchase. You will need it for any warranty service. Return: If you are not satisfied with our items and want to return to us, please contact us for a Return Material Authorization (RMA) number within 30 days of receipt before you arrange for return. We DO NOT accept any return without RMA number. Non-authorized returns will be refused and sent back to YOU at your cost. We do not take return after 30 days of receipt of our product. We offer free replacement and exchange service for the goods after 30 days of receipt. Customers are responsible for all return shipping charges incurred. Shipping and handling fee is NON-REFUNDABLE under any circumstances. Payment: We take credit card payment for domestic customers in USA only.Payment through Paypal is also acceptable. For international customers, we only take credit card payment through Paypal. Thank you for the interest in our products, welcome to coming and taking a look next time.