60%

12V Self-Priming RV Macerator Pump RV Mount Macerator Waste Water Pump 45 LPM 12

Share On:

Original price was: $77.82.Current price is: $46.69.

Category:
Meta:
Style Name : Submersible
Color : Black
Type : Does not apply
Maximum Flow Rate : 12 Gallons Per Minute
Model Number : MP-3500-12-1
UPC : 7445042597584
Style : Submersible
Brand : Does not apply
gtin13 : 7445042597584
Voltage : 12 Volts
Flow Rate : 12 Gallons Per Minute
Power Source : Battery Powered

Model:MP-3500-12-1;Volts:12V;AMPS:10.A MAX.AMPS:16.0A;Open Folw:45LPM/12GPM RV discharge mount macerator pump;Thermally Protected Motor;Intermittent duty cycle.Thermally Protected Motor;Intermittent duty cycle.It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage. The ideal solution for emptying marine holding tanks when not in a discharge area. RV discharge mount macerator pump,This pump is made of high quality stuff, hard and long-lasting. It can remove the impurity from the pump by ignoring or crushing. Easy to install and use. A great choice for you. DC macerator waste pump for emptying marine holding tanks, ideal for use when not in a discharge are, also suitable for fish box and livewell receptacles Features Macerator pump is designed to empty marine and RV holding tanks of normal waste. It is also an excellent choice for emptyingfish boxes of scales and residual waste. A flow rate of up to 12 gallons per minute conveniently empties any tank in minutes. The unique four-blade design ensures waste is ground up thoroughly. The pump is self-priming to a five foot lift when impeller is wet, four foot lift when impeller is dry, but for optimum performance and life, it should be mounted as close to the tank as possible. Marine pump out must be in proper discharge zones only. This mocerator will not handle hard objects, rags, or feminine napkins. Warning： If the pump is operated in an area containing flammable vapors, the wire leads mast be joined by insulated mechanical locking connectors. Loose or inadequate wire connections can spark, resulting in an explosion. All installations should be done by a qualified electrician. Pump should be operated on a separate circuit. Pump should be connected to properly sized momentary switch. This prevents pump from damage due to long periods of dry run condition.

Related products